19 Strand 1 AWG Aluminum Primary UD Cable with 14 AWG 1/3 Neutral - EPR/LLDPE Insulated MV-90 133% 220 mil 15 kV for Underground Power Distribution and Industrial Electrical Projects

[pdf] [/pdf]

1 AWG 19 Str Aluminum Primary UD Cable 14 AWG 1/3 Neutral EPR / LLDPE MV-90 133% 220 mil 15 kV

Application:

• Underground primary residential and commercial distribution circuits.
• May be used in wet or dry locations, installed in underground ducts or direct burial.

Also Known As:

1 AWG Aluminum EPR cable, 1 AWG High voltage underground cable,5 kV to 46 kV aluminum cable,EPR insulated MV-90 cable, 1 AWG EPR LLDPE cable, 1 AWG MV-90 primary UD 46 kV cable

Standards:

• ICEA S-94-649: Standard for Concentric Neutral Rated Cables 5 – 46 kV.
• AEIC CS8: Specifications for Extruded Dielectric, Shielded Power Cable, rated 5 – 46 kV.

Maximum operating voltage:
• 5 kV – 46 kV, 100 and 133% IL 
Maximum conductor operation temperatures:
Wet and dry locations
• Normal: 105 °C
• Emergency: 140 °C
• Short Circuit: 250 °C

Construction:

• Conductor: Hard drawn aluminum Class B compressed or unilay compressed stranding per ASTM B231. On request: strand filled. Sizes: 8 AWG - 1000 kcmil.
• Conductor Shield: Semi conducting cross-linked polyethylene (XLPE).
• Insulation: Thermoset ethylene propylene rubber (EPR). On request: amorphous EPR, containing 0% PE and less than 72% Ethylene.
• Insulation Shield: Semi conducting cross-linked polyethylene (XLPE).
• Concentric Neutral: Soft annealed solid copper wires per ASTM B3, helically applied and uniformly spaced. Full or 1/3 Neutral. On request options: alternate neutral constructions, Water Swellable Powder (WSP), and ripcords.
• Jacket: Extruded to fill (Encapsulated) Black sunlight resistant linear low density polyethylene (LLDPE), with three Red Stripes.

Features:

• Low tension stripping compounds.
• True Triple extrusion system and closed handling raw materials system, to eliminate any contact with ambient, until extrusion of insulation and shields.
• On request, Sealed conductor with strand filled compound passes the production water penetration tests per ICEA-T-31-610 at 15 psi for 60 minutes.
• When requested, Strand Filled compound meets compatibility test requirements in accordance with ICEA-T-32-610.
• On request, Dual sealed cable (Strand Filled on conductor + WSP on Neutral wires) meets the water penetration requirements in accordance with ICEA-T-34-664.
• On request, can be UL Listed as MV90 for use in accordance with Article 328 of the NEC.
• On request, two abration resistant ripcords placed longitudinally 180° appart for easy jacket removal.

Specifications:

• Size: 1 AWG
• Number of Strands: 19
• Nominal OD Over Insulation (In): 0.80
• Number of Wires: 6
• 1/3 Neutral Size: 14 AWG
• Jacket Thickness (mil): 50
• Approximate Outside Diameter (In): 1.11
• Approximate Net Weight lb/kft: 571